Verkauf STANKO KOLOMNA Gebrauchtmaschinen

Gebrauchte Stanko MB 412. Max mass of drop parts 150 kgs. Price 3400 EUR

Gebrauchte Stanko P0443,2000ton.. Hydraulic cold stamping press Stanko P0443(Odessa), 1988. capacity 2000 tons. table 1000 x 1000 mm.,stroke 500 mm.,weight 27 ton.,price - 15000 EUR

Gebrauchte STANKO K 1430. Einstaender-Exzenterpresse, STANKO, K 1430 A - 100 t Bj. 1985 Tech. Zustand – sehr gut, - Druck: 100 t - Ausladung: 320 mm - Hub: 10 - 130 mm - Einbauhoehe: 400 mm - Tischgroesse: 850 x 560 mm x 100 mm - Stoesselverstellung: 100 mm - Huebe: 50-53/ per Min. - Maschinen-Gewicht: 8800 kg - Raumbedarf (B x T x H): 1,60 x 1,85 x 2,9 m Nockenschaltwerk Herion ROSS/Herion Sicherheitsventil Zusatzbremse DESCH-Lutex ZB 200 Zweihandausloesung - querliegende Exzenterwelle und pneumatisch betaetigter Kupplungs-Bremsenkomination - geeignet fuer Einlegearbeiten im Zweihandbetrieb - sicheres Einrichten - Einzelhub, Dauerhub - TUeV-Abnahme in 04/2016

Gebrauchte Stanko 5K32. Max wheel diameter 800 mm  Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm  Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.

Gebrauchte Stankoimport Gertner, Fuhrmeister 2A622/1600 . Ersatzteile fuer Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO z.B. komplette Bohrspindel SK50 ( Bitte beachten Sie die beigefügte pdf-Datei mit einer Zeichnung der Spindel) Kugelrollspindeln aus den drei Achsen ElektroMotoren, Vorschubmotor 3x, Hauptspindelmotor komplette Steuerung Siemens bzw Schaltschrank Bedientableau mit Digitaleinrichtung Glasmassstaebe Abnehmbare Planscheibe Durchmesser 360mm Radialbewegung des Supports der Planscheibe 100mm Umformer / Trafo Winkelbohrkopf Teilapparat Spindeldurchmesser Ø 110 mm Werkzeugaufnahme ISO 50 Technische Daten der urspruenglichen Maschine Verfahrweg laengs ca. 1.000 mm Querverfahrweg ca. 1.600 mm Vertikaler Verfahrweg 1.000mm Laengsbewegung der ausfahrbaren Spindel 710mm Drehzahlbereich 10-1.250 U/min Hauptmotor 11kw Drehzahlen 10 � ...

Gebrauchte Scharmann Stanko Import SK50. Planschieber für Bohrwerk zur Aufnahme in der Bohrspindel Werkzeugaufnahme SK50 Ssonderpreis

Gebrauchte Stankoimport Gertner, Fuhrmeister + CO 2A622/1600 . Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, e ...

Gebrauchte STANKO V1134, 250 ton. Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Gebrauchte StankoImport 2A622/1600. Elektronische Komponenten Bohrwerk StankoImport Stanko-Import 2A622/1600 Elektronische Komponenten aus einem Bohrwerk Stanko Import wie 3-Puls Thyristorverstärker Bosch Siemens Sikostart Bosch PC200 ZE mit Bosch Eprom Bosch PC200 E24V Input Bosch PC200 AR/2A Output Bosch PC200 NT5V Gvvrsw Murrelektronik Typ NLS 100-220/24 Uprim 110/220 Upc 24V= Mat.Nr. 031447-102401 Mat.Nr. 031447-102303 Ssonderpreis

Gebrauchte STANKO VV1139, 800T. Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Gebrauchte Stanko CNC Model. Stroke: 0 mm Throat: 0 mm Table diameter: 0 mm MERK   Stanko TYPE    7A420 M YEAR   70 er Stanko 7A420M Steek bank

Gebrauchte Stanko press. type: 6334A Deph of throat -- ramcentre: 450 mm Length: 2500 mm Depth : 2200 mm Height: 3300 mm

Gebrauchte STANKO 53A50H. Gear hobbing machine 53A50H, STANKO, with change gears

Gebrauchte STANKO VV1134 , 250 TN. Max. diameter of initial blank: 40 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 70 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Gebrauchte STANKO B1138 630T. - The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

Gebrauchte Stanko MA4132. Pneumatic air forging hammer Stanko MA4132 Weight of the falling parts: 196 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 330 kg/m Distance from ram axis-to-frame: 340 mm Anvil height above the floor: 750 mm Stroke run: 460 mm Striking area: 75x190 mm Motor: 15kW Overall dimensions mm: -Length: 930 mm -Width: 1860 mm -Height: 2160 mm Weight of the hammer: 3450 kg Weight of anwill 1650 kg Price 3800 EUR

Gebrauchte STANKO 5140. Gear slotting 5140, Russia production, with change gears

Gebrauchte STANKO 7400/0227.

Gebrauchte STANKO Teilapparat.

Gebrauchte STANKO 5A841. Gear grinder machine 5A841, Stanko, with change gears

Gebrauchte STANKO 3A164. Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm

Gebrauchte STANKO MA4129. Pneumatic air forging hammer STANKO MA4129 Weight of the falling parts: 80 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 140 kg/m Distance from ram axis-to-frame: 300 mm Anvil dimensions: -Length: 130 mm -Width: 63 mm -Anvil height above the floor: 800 mm Diameter of working cylinder: 250 mm Diameter of compressor cylinder: 260 mm Stroke run: 385 mm Optimal stamping section of work-piece: -Square: 60 mm -Rounded: 80 mm Overall dimensions mm: -Length: 790 mm -Width: 1566 mm -Height: 1900 mm Weight of the hammer with an anvil-block: 3100 kg Price 2800 EUR

Gebrauchte STANKO 2620.

Gebrauchte STANKO XC3 CHS 193. under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm

Gebrauchte Stanko 5C280P. Spiral Bevel Gear Generator Stanko 5C280P gear diameter 800 mm, module 16 Max gear ring width 125 mm, Spindle speeds range 20-125 rpm, Main motor power 7,5 kW, Overall dimensions LxWxH 3235x2180x2200 mm, Weight 15 tons.

Gebrauchte Stanko H5222A. Hersteller: Stanko Typ: H5222A Lagernummer: 0982 Stanzen: Ø30 in 16mm Ausklinken: 100 x 12mm Rundmaterial: 45 mm Quadratisches Material: 40 x 40 mm Winkelstahl: 125 x 125 x 12 mm Abmaße (LxBxH): 2000 x 1400 x 2400 mm Gewicht Maschine: 2,35 t

Gebrauchte STANKO 3M193/149.

Gebrauchte Stanko 16B16P. Type:nbsp;16B16P Distance between centers: 850 mm Swing over bed: 360 mm Swing over cross-slide: 190 mm Diametre of main spindle bore: 46 mm Power on main spindle: 7,5 HP

Gebrauchte Stanko 3B70V. The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg

Gebrauchte Stanko CNC Model. Table diameter: 7100 mm Turning diameter: 8000 mm Turning height: 3240 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   MAKE  STANKO 3KTC TYPE   1580 L YEAR    Overhauled 2006 SPECIFICATIONS Controll  Conventionel Max. turning diamter Ø   8000 mm Table / chuck size Ø   7100 mm Workpiece height    3240 mm Work piece weight   125000 Kg Horizontal movement support / ram    4400 mm Stroke support left ram    2000 mm Stroke support right ram    2000 mm Angle adjustment / ram swivable   - 15 / - 30 Gr Live tooling    Milling spindlel 650 Rpm Singel column or double column Double column   Spindle speeds / ranges    19.6 Rpm DIMENSIONS Length   9000 mm Width  &n ...

Gebrauchte Stankoimport 36642.M50.

Gebrauchte Stanko Spindle bore. Center height: 400 mm Center distance: 4000 mm Spindle bore: 110 mm MAKE   Stanko Russia TYPE     1 M YEAR    2003 SPECIFICATIONS Swing over bed Ø   830 mm Swing over cross slide   480 mm Distance between centres    4000 mm Work piece weight    4000 kg Spindle bore     110 mm Spindle speeds / ranges    1250 Rpm  

Gebrauchte Stanko CNC Model. Table diameter: 1400 mm Turning diameter: 1600 mm Turning height: 1000 mm Motor power: 25 HP/kW Positions ATC: 0   Positions APC: 0   SPECIFICATIONS Max. turning diamter Ø   1600 mm Table / chuck size Ø   1400 mm Workpiece height   1000 mm Work piece weight   8000 Kg Horizontal movement support / ram   700 mm Stroke support left ram   850 mm Angle adjustment / ram swivable   35 Gr Singel column or double column   Single column Spindle speeds / ranges  5 - 200 Rpm Power  25 Kw DIMENSIONS Length   3500 mm Width   4200 mm Height   4750 mm

Gebrauchte Stanko CNC Model. Table diameter: 1400 mm Turning diameter: 1600 mm Turning height: 1000 mm Motor power: 30 HP/kW Positions ATC: 0   Positions APC: 0   SPECIFICATIES Besturing  Conventionel Max. Draai diameter Ø  1600 mm Klauw plaat / tafel diameter Ø  1400 mm Max. Draai hoogte   1000 mm Werkstuk gewicht  8000 Kg Horizontale verplaatsing support   700 mm Slag van ram links / support links   850 mm hoek verstelling ram draaibaar ?graden   35 Gr Toeren - Snelheden - Stappen   18 steps 5 - 250 Rpm Vermogen Kw   30 Kw  

Gebrauchte Stankoimport Zubehör.

Gebrauchte Stankoimport Durchmesser 250 mm.

Gebrauchte Stanko.

Gebrauchte STANKO 1525 / 2008.

Gebrauchte Stanko Ø 1600 mm. Type: Stanko 1516 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 950 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1400 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long : 3170 mm Wide: 3030 mm Height: 4100 mm Weight: 20 ton

Gebrauchte Stanko Ø 1250 mm. Type: Stanko 1512 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 775 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1120 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long : 2750 mm Wide: 2975 mm Height: 4100 mm Weight: 16,5 ton

Gebrauchte Stanko.

Gebrauchte Stanko.

Gebrauchte Stanko.

Gebrauchte STANKO 2 H 118.

Gebrauchte STANKO 2 A 554.

Gebrauchte STANKO 2 A 554.

Gebrauchte STANKO 2 K 52.

Gebrauchte Stanko.

Gebrauchte Stanko 16K25. Stanko 16K25 Distance between centers: 2000 mm Swing over bed: 500 mm Swing over cross-slide: 290 mm Diametre of main spindle bore: 52 mm Number of speeds: 12,5 - 1600 rpm Digital screen: Yes Length: 2795 mm Width : 1240 mm Height: 1500 mm Weight: 3095 kg Max weight between centers: 1800 kg

Gebrauchte STANKOIMPORT 70430.