Verkauf DOOSAN FORKLIFT Gebrauchtmaschinen

Gebrauchte DOOSAN L126 TI. Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Gebrauchte DOOSAN L 136. Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 118(160) @ 2200 kW(ps)/rpm Medium Duty - kW(ps)/rpm Light Duty - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Gebrauchte DOOSAN L 136 TI. Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Gebrauchte DOOSAN VM960L. X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012

Gebrauchte DOOSAN PUMA MX2500LST. MAX DIAMETER OF ROTATION: 750 MM MAX DIAMETER SWITCHABLE: 680 MM SWITCHABLE LENGTH: 1195 MM CNC: FANUC 18i-TB MAIN SPINDLE: MAX SPEED. OF ROTATION: 2800 RPM DIN 55026 8 ' ' CHUCK NOSE BAR PASS: 95 MM MOTOR POWER: 30 KW SELF-CENTRING DIAMETER: 315 MM Tailstock: POSITIONING STROKE: 1310 MM RACEWAY: 150 MM TUBE DIAMETER: 115 MM TORRETA TOOLHOLDER: MOTOR POWER: 10-17.5 KW TOOL DIMENSIONS: 25X25 MM BARENI DIA DIMENSIONS: 32-40 MM

Gebrauchte DOOSAN/DAEWOO V180TI. DAEWOO MARINE ENGINE V180 TI + GEARBOX 1800 RPM 600 HP

Gebrauchte Doosan Hydraul.Abstützpratzen DX160W. Abstützung / Pratzen/ Traverse von einem MobilBagger Doosan mit einem Gesamtgewicht von ca. 16-19to. Das Anbauteil ist fast ungebraucht und wurde wegen Montage eines Gleisfahrwerks unmittelbar nach dem Neukauf des Baggers demontiert. Es kann anstelle des Räumschildes oder auf der gegenüberliegenden Seite montiert werden. Das genaue Baujahr und der Typ des Baggers sind nicht bekannt. Ssonderpreis

Gebrauchte DOOSAN PU126Ti. DOOSAN PU126TI 395 HP - 2100 RPM / 0 HOURS AFTER OVERHAUL / NEW PISTON RINGS / CONNECTING RODS / BEARINGS

Gebrauchte Doosan G15S-2. Doosan G15S-2 Forklift truck Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

Gebrauchte Doosan DN03-OOG01 - 70 kVA Generator - DPX-19850.

Gebrauchte Doosan DP180LB - 710 kVA Generator - DPX 19857.

Gebrauchte Doosan HM 45 H. Control: FANUC 18 M Technical data Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 560 mm Vertical travel (z axis): 560 mm Table divisions (B): 1 ° Pallets: Length: 450 mm Width: 450 mm Time of changing palets: 12.5 sec Transport weight: 300 kg Tool changer: Number of tools: 40 Tool diameter: 100 mm Tool lenght: 300 mm Max. tool-weight: 6 kg Time of tool changing: 1.6 / 4 sec Spindle nose:: MAS BT 40 Horizontal spindle speeds: number (steps): 2 stepless from: 120-3000 rpm up to: 3000-12000 rpm Feed range: 1 - 15000 mm/min Rapid traverse: long.: 40 m/min Rapid traverse: transversal: 40 m/min Rapid traverse: vertical: 30 m/min Spindle motor: AC 22/18.5 kW Feed motor: 3.8 kW Total power required: 45 kVA Machine´s weight about: 9000 kg Overall dimensions machine: Length: 3048 mm Width: 4051 mm Height: 3180 mm Various accessories: Internal cool ...

Gebrauchte Doosan DP126LB - 410 kVA Generator - DPX-19854.

Gebrauchte Doosan DP158LC - 510 kVA Generator - DPX-19855.

Gebrauchte Doosan DP180LA - 630 kVA Generator - DPX-19856.

Eckdaten: 1030 Fanuc, 1650 21 i-T, 12

Gebrauchte Doosan CNC Model. Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T 3 Chuck Kitagawa 630 mm Chip conveyor Tool eye Tool holders in Revolver Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

Eckdaten: 1030 Fanuc, 1650 18i-T, 12

Gebrauchte Doosan CNC Model. Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

Eckdaten: 850 Fanuc, 1350 Oi, 12

Gebrauchte Doosan CNC Model. Turning diameter: 850 mm Turning length: 1350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi Max. turning Ø: 850mm X-Axis:         293mm Y-Axis:         130mm Z-Axis:         1.350mm Spindle bore:   102mm Speedrange:     2800Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:5000Rpm Power live tools:7,5 kW Chip conveyor:  Yes  Stroke pinole:  5mm Quill Ø:        100mm Length:         4.500 mm  Width:          2.105 mm  Height:         2.300 mm  Weight:         7.500 kg 

Gebrauchte Doosan P086TI - 220 kVA Generator - DPX-19852.

Gebrauchte Doosan DP222LC - 825 kVA Generator - DPX 19858.

Eckdaten: 390 Fanuc, 800 18i-TB, 12

Gebrauchte Doosan CNC Model. Turning diameter: 390 mm Turning length: 800 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-TB Gantry loaded Bar feeder Double chuck 250 mm Axis X1 / X2 / Z1 / Z2 / C1 / C2 / Y / B Axis Max. turning Ø:  390mm X-Axis:          255mm Y-Axis:          120(+60/-60) mm Z-Axis:          800mm B Axis:          800° Spindle bore:    76mm Speedrange:      3500Rpm Spindle power:   26kW Subspindle speeds:4000Rpm Subspindle power:26kW ATC / revolver:  12 Speed live tools:4000Rpm Chip conveyor:   Yes  Tool eye:        Yes  Length:          4.000 mm  Width:           3.200 mm  Height:  ...

Gebrauchte Doosan CNC Model. Turning diameter: 570 mm Turning length: 1330 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18-T Max. turning Ø: 570mm X-Axis:         282mm Z-Axis:         1.330mm Spindle bore:   77mm Speedrange:     3500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  100mm Quill Ø:        100mm Length:         4.000 mm  Width:          2.000 mm  Height:         2.100 mm  Weight:         6.700 kg 

Eckdaten: 480 , 600

Gebrauchte Doosan BGA180. Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

Gebrauchte DOOSAN DNM 750 II. Doosan DNM 750 II Machining center - vertical - new in 2018 - control system: FANUC

Gebrauchte Doosan P086TI-1 - 165 kVA Generator - DPX-19851.

Gebrauchte Doosan CNC Model. Turning diameter: 900 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: OT DOOSAN - PUMA 450 CNC Lathe Ø 900 x 1000 mm MACH - ID 6351 Make: DOOSAN Type: PUMA 450 Control: Fanuc OT YOP: 1997 Max. turning Ø    900 mm X-Axis    370 mm Z-Axis    1.075 mm Spindle bore       117 mm Speedrange         2000 Rpm Spindle power    37 kW ATC / revolver    12 Chip conveyor      yes Pinole taper          6 Mk Stroke pinole       150 mm Quill Ø     150 mm Dimensions Length      6.200 mm Width        2.460 mm Height       2.800 mm Weight       ...

Gebrauchte Doosan CNC Model. Turning diameter: 670 mm Turning length: 3190 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Fanuc MACH - ID 6090 Make:DOOSAN Type:PUMA 3100 ULY Control:FANUC YOP:2010 Hours:5800 Max. turning Ø   670 mm X-Axis      293 mm Y-Axis      130 mm Z-Axis       3.190 mm Spindle bore     102 mm Speedrange       2800 Rpm Spindle power      25 kW Speed live tools       5000 Rpm Control          Fanuc Chip conveyor       Yes Tool eye         Yes Pinole taper        Mk 4 Mk Dimensions Length        6.600 mm Width      & ...

Gebrauchte Doosan BGA180. Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

Gebrauchte Doosan Daewoo, Hyundai, Hitachi Mo

Gebrauchte Doosan 12235. PROD. DOOSAN TYP 12235 S/N UN512235FCY893945 ROK 2012 MOC (kW) 224 WYDAJ. (m3/min) 23.4 CIS (bar) 13.1 GODZ (DOC/OGÓL) FALOWNIK nie WBUD. OSUSZACZ nie

Gebrauchte Doosan SP344CB. Doosan SP344CB 70 kVA weight. 1.340 Dimension (mm): 2500 x 1050 x 155

Gebrauchte Doosan CNC Model. Table length: 920 mm Table width: 435 mm Longitudinal X: 762 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Fanuc CNC Model: i Series MACH-id    5565 MAKE         DOOSAN TYPE            DNM 400 - II YOP             2014 SPECIFICATIONS X - Travel       762 mm Y - Travel       435 mm Z - Travel        510 mm Table Length     920 mm Table Width      435 mm Table load         600 Kg Feed rate  X-Axis        10.000 mm/min. Feed rate Y-Axis          10.000 mm/min. Feed rate Z-Axis          10.000 mm/min. Spindl ...

Gebrauchte Doosan CNC Model. Turning diameter: 320 mm Turning length: 350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi-Tc MACH-id     5463 MAKE         Doosan Korea TYPE           Lynx 220 YOP             2009 SPECIFICATIONS Max. turning Ø    320 mm X-Axis         175 mm Z-Axis          330 mm Spindle bore       51 mm Speedrange       4000 Rpm ATC / revolver        12 Control    FANUC Oi-TC Chip conveyor         yes Tool eye       yes Pinole taper        4 Mk Stroke pinole        80 mm Quill Ø       65 mm DI ...

Gebrauchte Doosan M0617. Coobot Doosan M0617 Tragfähigkeit: 6 kg Reichweite: 1700 mm Wiederholgenauigkeit: ±0,1 mm Artikelzustand: Neu

Gebrauchte Doosan MYNX 9500.

Gebrauchte Doosan CNC Model. Table length: 790 mm Table width: 435 mm Longitudinal X: 635 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Fanuc MACH-id     5414 MAKE         DOOSAN TYPE           DNM 400 A YOP             2010 SPECIFICATIONS X - Travel      635 mm Y - Travel      435 mm Z - Travel       510 mm Table Length         790 mm Table Width           435 mm Table load              400 Kg Feed rate X-Axis        30.000 mm/min. Feed rate Y-Axis         30.000 mm/min. Feed rate Z-Axis          30.000 mm/m ...

Gebrauchte Doosan CNC Model. Turning diameter: 510 mm Turning length: 650 mm Turret positions: 12 CNC Brand: Fanuc MACH-id     5372 MAKE          DOOSAN TYPE            LYNX 220 LM YOP              2008 SPECIFICATIONS Max. turning diameter Ø       510 mm DBC Turning length        650 mm X-Axis       175 mm Y-Axis       650 mm C-Axis        360000 ° Spindle bore      51 mm Speedrange        5000 Rpm ATC / revolver       12 Speed live tools      6000 Rpm Control            FANUC Chip conveyor        Yes Tool eye      &nbs ...

Gebrauchte Doosan DNM 6700.

Gebrauchte Doosan CNC Model. Turning diameter: 780 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: i Serie MACH-id   5069 MAKE        DOOSAN TYPE           PUMA 2600 L YOP             2011 SPECIFICATIONS Swing        780 X-Axis      260 mm Z-Axis       1350 mm Control      FANUC i Serie Chip conveyor        Yes Tool eye        Yes DIMENSIONS Length        3600 mm Width          2000 mm Height         2000 mm

Gebrauchte Doosan CNC Model. Turning diameter: 630 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21i-TB MACH-id    4209 MAKE        DOOSAN TYPE          PUMA 280 M YEAR         2008 SPECIFICATIONS Swing over bed    630 Swing                  500 X Axis                  242 Z Axis                   680 Controll                  Fanuc 21i-TB Tool changer          12 Chip conveyor        Yes Swing over bed Ø      630 mm DIMENSIONS Length       4000 mm Width         ...

Gebrauchte Doosan CNC Model. Table length: 790 mm Table width: 435 mm Longitudinal X: 635 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Fanuc CNC Model: Oi MACH-id   4216 MAKE       DOOSAN TYPE         DNM 400 A YEAR        2010S PECIFICATIONS X - Travel       635 mm Y - Travel       435 mm Z - Travel        510 mm Controll      FANUC Oi Table Length x Width      790 x 435 mm Table load in kG     400 Kg Spindle Taper       ISO 40 kW power on spindle      11 kW Spindle speeds / ranges     8000 Rpm ATC tool changer    20 Number off controlled axis  3 DIMENSIONS Length&nbs ...

Gebrauchte Doosan CNC Model. Turning diameter: 510 mm Turning length: 320 mm Turret positions: 0 CNC Brand: Fanuc MACH-id    4217 MAKE         DOOSAN TYPE           LYNX 220 L YEAR          2013 SPECIFICATIONS Swing over bed Ø   510 mm Control        FANUC Swing over cross slide     290 mm Distance between centres      320 mm Spindle bore      45 mm Spindle speeds / ranges    6000 Rpm Power      15 Kw DIMENSIONS      Length      2400 mm Width       1600 mm Height       2000 mm

Gebrauchte Doosan CNC Model. Table length: 1200 mm Table width: 540 mm Longitudinal X: 1020 mm Cross Y: 540 mm Vertical Z: 530 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc MACH-id    4218 MAKE        DOOSAN TYPE          MYNX 5400 / 50 YEAR         2010 SPECIFICATIONS X - Travel        1020 mm Y - Travel          540 mm Z - Travel           530 mm Controll            FANUC Table Length x Width          1200 x 540 mm Table load in kG         800 Kg Spindle Taper        BT 50 kW power on spindle        15 kW Spindle speeds / ranges      8000 Rpm ATC tool change ...

Gebrauchte Doosan Puma MX2000 LS.

Gebrauchte Doosan Puma 280M.

Gebrauchte Doosan PUMA 280LM.

Gebrauchte Doosan TT1800SY.

Gebrauchte Doosan Puma V8300.

Gebrauchte Doosan Puma 400L.

Gebrauchte Doosan Puma MX 2500 S.