Manufacturer: KOKI TEC
Series: ULTIMA (TakuROBO Benchtop Type)
CE Mark: Registered on all three units
System comprises: ULTIMA-TRZ + ULTIMA-SPZ + ULTIMA-PHS
Suitable for: Prototype to small and medium volume PCB production
ULTIMA-TRZ Selective Soldering Machine
- Dimensions (without signal tower): 940 (L) x 885 (W) x 540 (H) mm
- Outer dimensions (with signal tower): 940 (L) x 885 (W) x 753 (H)
mm
- Body dimensions: W620 x L940 x H442 mm
- Minimum PCB size: 50 (W) x 50 (L) mm
- Maximum PCB size: 250 (W) x 330 (L) mm
- PCB thickness: 0.8 to 2.0 mm
- Machine weight: approx. 120 kg
- Power source: single-phase AC 200V plus/minus 5 percent, 4 kVA
- Nitrogen supply: purity 99.99 percent or more, 0.4 to 0.5 MPa, 25
L/min
- Solder pot capacity: approx. 16 kg (specific gravity 7.3)
- Nozzle range: 17 sizes from diameter 2 to diameter 20 mm inner
diameter, including Aerojet
- nozzle
- Standard nozzles available: diameter 2.5, 3, 4, 5, 6, 7, 8, 9, 10,
12, 14, 16, 20 mm
- Superfine nozzles available: diameter 2, 2.5, 3, 4 mm
- Jet wave accuracy: plus/minus 0.3 mm or less
- Normal solder temperature: 230 to 330 degrees C
- Nitrogen heating temperature: 350 degrees C plus/minus 10 percent
- Moving part: PCB table (X-Y-Z axes)
- Soldering modes: Line mode and Point model
ULTIMA-SPZ Spray Fluxer
- Dimensions (without signal tower): 630 (L) x 912 (W) x 390 (H) mm
- Outer dimensions (with signal tower): 630 (L) x 912 (W) x 862 (H)
mm
- Body dimensions: W630 x L910 x H390 mm
- Minimum PCB size: 50 (W) x 50 (L) mm
- Maximum PCB size: 250 (W) x 330 (L) mm
- PCB thickness: 0.8 to 2.0 mm
- Machine weight: approx. 60 kg
- Power source: single-phase AC 100 to 240V plus/minus 10 percent, 0.2
kVA
- Air supply: 0.4 to 0.5 MPa
- Flux tank capacity: 0.3 to 0.4 litres
- Fluxer type: Two-fluid Aerojet nozzle
- Moving part: Spray gun (X-Y axes)
ULTIMA-PHS Preheating Machine
- Dimensions (without signal tower): 690 (L) x 602 (W) x 682 (H) mm
- Outer dimensions (with signal tower): 690 (L) x 602 (W) x 901 (H)
mm
- Body dimensions: W600 x L602 x H682 mm
- Minimum PCB size: 50 (W) x 50 (L) mm
- Maximum PCB size: 250 (W) x 330 (L) mm
- PCB thickness: 0.8 to 2.0 mm
- Machine weight: approx. 45 kg
- Power source: single-phase AC 200V plus/minus 10 percent, 2.4 kVA
- Temperature setting range: 0 to 400 degrees C
Key Features
- Stable soldering quality replacing manual hand soldering
- Small footprint — suitable for cell production environments
- Available from prototype production through to small and medium
volume runs
- Aero jet nozzle for precise and clean flux application
- N2 nitrogen heating for anti-oxidation of solder and land, and
improved solder fluidity
- Diagonal PCB lift movement prevents solder bridge generation
- Up to 3 solder pots can be added to increase production volume
- Energy-saving and carbon-neutral compatible design
- Applicable to heavy soldering with special nozzles
- Productivity advantage over manual soldering: 1,500 pcs/day vs 1,300
pcs/day manual
- Operator reduction: 2 persons vs 6 persons manual
- Significant solder material savings: 4 kg vs 18 kg per day manual
Available Options
- Program creation system Freedom (separate PC required)
- Data creation supporting software (scanner and Gerber data NC
creation)
- Production log management application
- Parts library management application
- Application for multi-communication (up to 3 TRZ units and 1 SPZ)
- Barcode and QR code automatic PCB model switching application
- Three-light signal tower
- Solder shortage alarm
- Weekly timer for automated machine startup
- Superfine nozzles
- Laser-type wave height detection and feedback control
- Sensors for solder overheat and N2 overheat
- PCB detection and error-proof functions
- PCB presence sensor
- Flux flowmeter
- Robot I/O
- Aluminium frame stand
- Adaptive voltage and step-down transformer
- Automatic solder feeder (diameter 2 mm solder wire, 1 kg bobbin)
- Safety cover with exhaust duct (open type, open/close type, or with
area sensor)
- Board size expansion option: X axis extended from 330 mm to 400
mm
- Soldering verification camera with LED lighting
- Centre bar anti-warp mechanism
Find more here - /
Contact us at -
