Used Tetra Pak A3 flex 500-1000ml SQ 300V Filling machineTechnical
Specifications & Performance DataThe Tetra Pak A3/Flex 300V is a used
bottling line filling machine designed for aseptic carton packaging
applications. Built for industrial packaging and beverage production,
this filling machine forms, sterilizes and fills carton packs in an
integrated production process. Capacity reaches 8,000 p/h for package
sizes below 330 ml, 7,000 p/h for sizes above 330 ml, 5,500 p/h for
packages above 1,500 ml, and 5,000 p/h for 1,890/2,000 ml
packages.Manufacturer: Tetra PakModel: A3/Flex 300VMaximum output:
8,000 p/hElectrical supply: 400/230 V ±10%Frequency: 50/60 Hz
±2%Recommended main fuse: 100 A, or 160 A with DIMC FlexMachine body
height: 3,621 mmStandard width: 7,225 mmPT Flex length: 8,327
mmAdvanced Automation & Control SystemsThis Tetra Pak filling machine
integrates controlled heat sterilization functions for pre-heating,
spraying and drying, together with tube sealing, production and
cleaning modes. Power consumption varies by operating phase, including
7.7 kW for tube sealing, 32.9 kW for heat sterilization pre-heating,
26.9 kW for heat sterilization spraying, 23.9 kW for heat
sterilization drying and 27.6 kW during production. The PT Flex
configuration has corresponding operating loads of 9.3 kW, 33.8 kW,
27.4 kW, 24.2 kW and 29.7 kW.The machine operates on a 400/230 V
electrical supply at 50/60 Hz. Integrated cleaning functionality
supports hygienic operation, while the stated environmental operating
range is 5 °C to 40 °C, with a recommended ambient temperature of
15–30 °C.Production Line Integration CapabilitiesDesigned as a core
aseptic carton filling machine, the A3/Flex 300V can be integrated
into a complete industrial packaging line with downstream conveyors,
accumulation systems, coding equipment and secondary packaging
machinery. Its production capacity range supports different carton
pack sizes, from formats below 330 ml through larger 1,890/2,000 ml
packs.Machine TypeManufacturer / ModelFilling MachineTetra Pak A3/Flex
300VProduct supply requires a connection pressure of 70–250 kPa. The
system can be connected to compressed air, cooling water, ice water,
steam and cleaning media services appropriate for aseptic filling
operations.Machine Condition & Maintenance HistoryThis second hand
Tetra Pak A3/Flex 300V filling machine is presented as used bottling
and packaging machinery. The available technical data identifies its
operating requirements, process consumptions and installation
parameters for evaluation within a beverage production or industrial
packaging project.Integrated Cleaning Unit functionality is specified,
supporting cleaning procedures as part of routine operation. Cleaning
power consumption is stated at 10 ± 1.2 kW, with further requirements
for cold water, hot water, steam, foam detergent and external cleaning
in DIMC Flex configuration.Operational Performance & VersatilityThe
A3/Flex 300V supports aseptic carton filling through heat
sterilization, hydrogen peroxide treatment and controlled utility
supply. Hydrogen peroxide concentration is specified at 35%, with
consumption of 1.5–2.0 l/h. Steam supply is specified at 170 kPa and
130 °C, with consumption of 2.4 kg/hpressed air requirements include
a supply pressure of 600–700 kPa. Air consumption is 470 Nl/min for
the standard Tetra Pak A3/Flex configuration and 1,125 Nl/min for the
A3/Flex with PT/Flex configuration. Optional ice-water cooling
operates at 200–400 kPa, with an inlet temperature of 2–5 °C and
a flow rate of 2–7 l/min.Installation Requirements & Site
PreparationInstallation planning should allow for the machine
footprint, access around the operating platform and the height
required for the filling system. The listed configuration includes a
platform with stair measuring 2,470 mm, a floor width of 5,202 mm,
roof height of 9,645 mm and DIMC Flex dimensions of 10,645 mm and
8,549 mm.The installation requires 400/230 V electrical power,
compressed air at 600–700 kPa, product supply at 70–250 kPa, cold
water, hot water, steam and cleaning media connections. Cold-water
supply is specified at a minimum of 3,000 l/h. Hot water requires
300–450 kPa pressure and an inlet temperature of 55–60 °C.
Cooling and utility connections should be sized according to the
selected machine configuration.Safety Standards & Compliance
CertificationThe filling machine is designed for controlled industrial
packaging environments and requires operation within the specified
ambient temperature range. Its aseptic processing arrangement uses
defined steam, cooling-water, compressed-air and hydrogen-peroxide
operating conditions to support hygienic carton filling procedures.For
machines equipped with HI, nitrogen quality must comply with
applicable local regulations and specifications. Where local
requirements do not apply, nitrogen is specified in reference to
European Directive 1996/77/EC or the US Code of Federal Regulations.
Nitrogen su
