WEEKE Profiline ABL 220

Metallbearbeitungs- und Werkzeugmaschinen / Sonstige Metallbearbeitungsmaschinen

Hersteller: Weeke

Modell: Profiline ABL 220

Eintrags-Nr.: 169276706

Anzahl: 1

Datum: 08.04.2026

Baujahr: 2008 Gebrauchtmaschine

Standort: Finland

Preis:


Positionsnummer des Verkäufers: 8724625

Manufacturer: Weeke

Model: Profiline ABL 220

Year of Manufacture: 2008

Type of Machine : CNC drilling machine with fitting units

CE Certified: Yes

Electrical Specifications

- Operating Voltage: 400 V / 50 Hz
- Power: 24 kW
- Current: 50 A
- Control Voltage: 24 V DC
- Workpiece Dimensions
- Length: min. 250 mm / max. 2400 mm
- Width: min. 240 mm / max. 850 mm
- Thickness: min. 12 mm / max. 60 mm

The machine processes rectangular workpieces made of melamine-coated chipboard and

similar panel materials.

Machine Performance

- Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift.
- Axis Speeds:
- X-axis: 80 m/min
- Y-axis: 80 m/min
- Z-axis: 20 m/min
- Drilling Unit - V18 High Speed 7500
- Configuration: 18-spindle vertical drill unit (CONFIG-V18)
- Spindle Speed: 1500 to 7500 rpm (variable speed controlled)
- Direction of Rotation: Right / Left
- Stroke Length (Z direction): 60 mm
- Drilling Depth: max. 38 mm / max. 55 mm with special blade
- Shank Diameter: 10 mm
- Total Drill Bit Length: 70 mm
- Maximum Drill Hole Diameter: 35 mm
- Spindle Spacing: 32 mm
- Machining Capabilities
- Vertical drilling from above
- Horizontal drilling into the front corner of the workpiece
- Adhesive application to drill holes from above (gluing unit included)
- Installation of drawer slide rails (Tandembox type, two sizes: 270 mm and 450 mm)
- Installation of cylindrical shelf brackets from above

Additional Equipment Included

- 2 additional crossbars for attaching machining units (NC-controlled Y and Z)
- Additional drilling rig for front angle (longitudinal) drill holes
- Gluing unit - adhesive dispensing into drill holes from above
- 2 pick-up and crimping devices for Tandembox drawer slide rails
- 4 lifting devices for drawer guides (pneumatic)
- 2 compression units for cylindrical shelf brackets
- 2 vibrating conveyors for cylindrical rack brackets
- Wireless barcode scanner and barcode control software
- Ethernet network interface with switch (8-fold 10/100 Mbit)
- Emergency circuit breaker and HOMAG group machine connection
- Mobile remote control with 10 m cable
- Operating and maintenance documentation included

Installation Requirements

- Required room height: approximately 3450 mm
- Working height (IGEL Buffer): 950 mm
- Floor: Concrete C25/30, minimum thickness 180 mm

Find more here - /

Contact us at -
Diese Maschine auf Facebook
Diese Maschine als verkauft

Anfrageformular

Sind Sie Händler?

Bitte senden:

Gesuchsanfrage?

Kopie an Sie?

Eingabedaten speichern?

Manufacturer: Weeke

Model: Profiline ABL 220

Year of Manufacture: 2008

Type of Machine : CNC drilling machine with fitting units

CE Certified: Yes

Electrical Specifications

- Operating Voltage: 400 V / 50 Hz
- Power: 24 kW
- Current: 50 A
- Control Voltage: 24 V DC
- Workpiece Dimensions
- Length: min. 250 mm / max. 2400 mm
- Width: min. 240 mm / max. 850 mm
- Thickness: min. 12 mm / max. 60 mm

The machine processes rectangular workpieces made of melamine-coated chipboard and

similar panel materials.

Machine Performance

- Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift.
- Axis Speeds:
- X-axis: 80 m/min
- Y-axis: 80 m/min
- Z-axis: 20 m/min
- Drilling Unit - V18 High Speed 7500
- Configuration: 18-spindle vertical drill unit (CONFIG-V18)
- Spindle Speed: 1500 to 7500 rpm (variable speed controlled)
- Direction of Rotation: Right / Left
- Stroke Length (Z direction): 60 mm
- Drilling Depth: max. 38 mm / max. 55 mm with special blade
- Shank Diameter: 10 mm
- Total Drill Bit Length: 70 mm
- Maximum Drill Hole Diameter: 35 mm
- Spindle Spacing: 32 mm
- Machining Capabilities
- Vertical drilling from above
- Horizontal drilling into the front corner of the workpiece
- Adhesive application to drill holes from above (gluing unit included)
- Installation of drawer slide rails (Tandembox type, two sizes: 270 mm and 450 mm)
- Installation of cylindrical shelf brackets from above

Additional Equipment Included

- 2 additional crossbars for attaching machining units (NC-controlled Y and Z)
- Additional drilling rig for front angle (longitudinal) drill holes
- Gluing unit - adhesive dispensing into drill holes from above
- 2 pick-up and crimping devices for Tandembox drawer slide rails
- 4 lifting devices for drawer guides (pneumatic)
- 2 compression units for cylindrical shelf brackets
- 2 vibrating conveyors for cylindrical rack brackets
- Wireless barcode scanner and barcode control software
- Ethernet network interface with switch (8-fold 10/100 Mbit)
- Emergency circuit breaker and HOMAG group machine connection
- Mobile remote control with 10 m cable
- Operating and maintenance documentation included

Installation Requirements

- Required room height: approximately 3450 mm
- Working height (IGEL Buffer): 950 mm
- Floor: Concrete C25/30, minimum thickness 180 mm

Find more here - /

Contact us at -
Verkäufer Angebot Nr. resale 8724625
Diese Maschine auf Facebook
Diese Maschine als verkauft
Geprüfter
Händler

Verkäufer

UCY Industrial GmbH

UCY Industrial GmbH

Herr Nick Breinfalk
82049 Pullach
Deutschland

RESALE Anbieter seit 2024

  • Maschinenliste (1481)

Anfrageformular

Sind Sie Händler?

Bitte senden:

Gesuchsanfrage?

(zu obiger Maschine eine Gesuchsanfrage an alle Händler senden)

Kopie an Sie?

(Kopie Ihrer Anfrage an Ihre Emailadresse)

Eingabedaten speichern?

(Eingabedaten für weitere Anfragen speichern)

aktuelle Weeke Profiline ABL 220 + ähnliche Weeke-Modelle

2003 WEEKEBHC 600 Profiline