Verkauf FAT JAROCIN AFM Gebrauchtmaschinen

Gebrauchte fatosa 35 litre bowl cutter. 35 litre bowl cutter stainless steel 2 speed 1400/2800 2 machines year of construction 2013 and 2015

Gebrauchte fatosa 160 self feed mincer. new fatosa 160 mself feed mincer 3 plates 2 knife unger system Up to 5,000 Kg per hour, hopper capacity 100 Kgs all stainless steel

Gebrauchte FAT POlen Lunetten TUR 560 - TUR 630. Feste und Mitgehender Lunetten fuer FAT Polen TUR 560 und TUR 630

Gebrauchte FATA HUNTER, FRÖHLING, CAN STOCK-220 MM, 0.15-1.0 MM. Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Gebrauchte Fat CNC Model. Center height: 315 mm Center distance: 2000 mm Spindle bore: 140 mm CNC Brand: Siemens CNC Model: 810 D Manual Turn FAT - TUR 630 A Teach-in Cycle lathe Ø 630 x 2000 x Bore 140 mm MACH - ID 6335 Make: FAT Type: TUR 630 A Control: SIEMENS 810D Manual Turn YOP: 2004 Swing over bed Ø   630 mm Swing over cross slide Ø     370 mm DBC Turning Length      2.000 mm Spindle bore       140 mm Spindle power     18,5 kW Bed width        433 mm Tailstock spindle Ø     100 Ø Stroke pinole      200 mm Spindle taper       5 Mk Workpiece weight      600 kg Speeds / ranges         1850 Rpm Feed rate X-Axis     ...

Gebrauchte Fat Tur Ø 630 x 1500 mm. Fat Tur Ø 630 x 1500 mm Distance between centers: 1500 mm Swing over bed: 630 mm Swing over cross-slide: 315 mm Number of speeds: 1800 rpm Weight: 3150 kg

Gebrauchte FATA. Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators

Gebrauchte FAT TUR 630 MN. Maschinen-Details Lagernummer 1105-03592 Maschinenart Drehmaschine - zyklengesteuert Fabrikat FAT Typ TUR 630 MN Baujahr 2011 Steuerungsart CNC Steuerung Siemens 810D MANUAL TURN Lagerort FRANKREICH Ursprungsland polen Lieferzeit sofort Frachtbasis Ab Standort frei verladen Technische Details Drehdurchmesser 370 mm Drehlänge 3000 mm Spitzenhöhe über Bett 630 mm Umlaufdurchmesser max. über Planschieber 370 mm Spindelbohrung 105 mm Spindeldrehzahlen: 2 Stufen 2 - 2500 U/min Werkzeugaufnahme REVOLVER VDI 40 Steuerung Siemens 810D MANUAL TURN Gesamtleistungsbedarf 18,5 kW Maschinengewicht ca. 6 t Zusatzinformationen Ausstattung: REVOLVER 8 FACH VDI 40 Späneschutzwand automatische Kühlmitteleinrichtung RS 232 Schnittstelle 3-Backenfutter Durchmesser 315 mm HOHL SPINDEL DURCH. 105 MM automatisches Schmiersystem Prospekt LUNETT ...

Gebrauchte FATOSA TBG 480. Hersteller: Fatosa Typ: TBG 480 Baujahr: 2004 Leistung: 5,5 kW Anschluss: 400 V Produktivität: bis 3000 kg / h Maximalgröße der Blöcke: 600 x 480 x 250 mm Max Blocktemperatur : -20°C Nettogewicht: 550 kg Abmessungen: Länge 1350 x Breite 700 x Höhe 1750 cm Mit angehobenem Frontdeckel - Hohe 2117 mm Die Guillotine ist nur mit Querschneidemesser ausgestattet. Fordern Sie ein Angebot an iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Gebrauchte FAT Ponar TUR 630. 1 Fester Setzstock mit Rollenpinolen 1 Mitgehender Setzstock

Gebrauchte FAT TUR560 MN X 1000.

Gebrauchte FAT TUR930SMN.

Gebrauchte FAT TUR 630. mit CNC-Zyklensteuerung, Fabr. SIEMENS, Typ: SINUMERIK 840D, Leistungsaufnahme: 18,5 kW, Futterbearbeitung: Durchmesser: 450 mm, max. Drehlänge: 2000 mm, bis 3000 UPM, ANMERKUNG: Überholung der Maschine im Jahr 2021

Gebrauchte FAT TUR 630M. max. Drehlänge: 3000 mm, Spitzenhöhe: ca. 300 mm, Hohlspindeldurchmesser: 100 mm, mit 3-Achs-Digitalanziege, Fabr. SONY, 1 Dreibackenfutter, Multifix-Schnellspannsystem u. Kühlmitteleinrichtung

Gebrauchte FATA. ZINCALUM LINE FATA PRODUCTION MACHINERY Manufacturer: FATA PRODUCTION MACHINERY YOM: 1990 Main Equipment: 2 Uncoilers Entry lap welder (Taylor Winfield) 6 Strands Horizontal Entry Accumulator Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down Chute with electrical heaters AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type inductors AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type inductors. 3roll type Rig. KHOLER Air knives Coating thickness measuring (DMC) 6 Hi Leveller Chemical treatment (Inmersion Tank) Oiler Flying Shear 2 Tension Reels with edge control Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 1 ...

Gebrauchte FATOSA PA- 130. • Picadora automática marca FATOSA modelo PA-130. • Sistema de alimentación automático mediante tolva de carga y husillo cónico alimentador, hacia husillo de salida, portador de placas y cuchillas de corte. • Picado perfecto sin roces ni magullamientos, características esta que, unidas a su gran robustez, hacen destacarla sobre el resto de las máquinas del mercado. • La máquina está diseñada para picar carne, pescado, vegetales… • La temperatura mínima a la que podrán estar los productos a picar dependerá de la potencia de motor escogida, del diámetro de los agujeros de la placa de salida y de la combinación de placas y cuchillas que se haya montado. • Cuadro de mandos por pulsadores. • Interruptor general de alimentación • Construida en su totalidad en acero inoxidable AISI-304 • Transmisión por reductor con ejes t ...

Gebrauchte FAT TUR 560. Tour Cnc Occasion FAT Type TUR 560 MN X 2000 mm Cnc SIEMENS 810 D Manual turn Tour Cnc Occasion FAT Type TUR 560 MN X 2000 mm Cnc SIEMENS 810 D Manual turn Diametre sur banc 560 mm Diametre sur trainard 300 mm Entre pointe 2000 mm Caractéristiques complete sur photo Vidéo disponible par WhatsApp ...

Gebrauchte Jostec Fat Fryer. Good quality of all kind of yeast and non yeast doughnuts due to complete automatic baking process Proofing Feeding Automatic Baking Turning Unloading

Gebrauchte Sind New Boiling Melting Fat 300 L. KETTLE FOR MELTING FAT

Gebrauchte IPS FAT 60.

Gebrauchte Schuko FATi-SR 200/30.

Gebrauchte AFM 2420/770/H1260 mm.

Gebrauchte AFM Harnas R 550 E. AFM Harna? R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harna? R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harna? R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot nu ...

Gebrauchte AFM TAE 25N. AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in t ...

Gebrauchte Chemtech Chemetator 212 W + Crystalliser WH35F fat/ margar.

Gebrauchte AFM DEFUM BACA R 1000. AFM DEFUM BACA R 1000 CNC vertical machining center produced in 2016 in Poland is used for precision workpiece machining. Wide machining capabilities, high productivity and an extremely stable design with reliable components make the machine ideal for both series and unit production. In order to achieve the highest precision in the machining process, the spindle unit uses high-accuracy bearings and backlash-free reciprocating screw gears for the X,Y,Z axis feeds. Both spindle rotational speed and work feeds are programmed and controlled steplessly in the perfectly optimised SIEMENS CNC controller. In addition, the controller has many useful functions that maximise machining productivity and allow the full potential of the BACA R1000 CNC machining center to be exploited. The BACA R 1000 milling center also has a wide range of equipment, including a  ...