Used Tetra Pak TCAP 45 2005 1000SQ Helicap 27Technical Specifications
& Performance DataThe Tetra Pak Tetra Cap Applicator 45 is an
industrial capping machine designed for the application of caps on
carton packs within beverage production and industrial packaging
operations. Manufactured in 2005, this second hand machine is
configured for a production speed of up to 7,000 pph and currently
operates with the 1.000 Prisma SQ format.Manufacturer: Tetra PakModel:
45Year: 2005Production speed: 7,000 pphCurrent format: 1.000 Prisma
SQCurrent cap format: Slim capAlternative cap format: HeliCap
27Dimensions: 4250 x 2545 x 2660 mmWeight: 1200 kgAdvanced Automation
& Control SystemsThis capping machine is intended for synchronized
inline operation, applying caps consistently to packs supplied from an
upstream filling machine. Its operating configuration supports stable
handling of the current Prisma SQ format and provides the possibility
of conversion to the HeliCap 27 cap format. Electrical supply
requirements are 400V and 50Hz.Electrical supply: 400V,
50HzCompressed-air consumption: 300 Nl/min at 5.5 BarDocumentation:
Paper documentation includedProduction Line Integration
CapabilitiesThe Tetra Cap Applicator 45 is suited to integration into
a used bottling line or carton packaging line, positioned after the
filling stage to apply caps before downstream handling and secondary
packaging. It can support beverage production environments where
carton packs require reliable cap application as part of a coordinated
industrial packaging process. Integration should include compatible
product conveyors, pack spacing, cap supply arrangements and line
controls matched to the selected pack and closure format.The current
setup is dedicated to the 1.000 Prisma SQ format with slim caps. A
change to HeliCap 27 is possible, allowing the machine to be
considered for production lines using this alternative cap
style.Machine Condition & Maintenance HistoryThe machine is
operational and has accumulated approximately 22,000 operating hours.
This second hand Tetra Pak capping machine is supplied with paper
documentation, supporting technical review, routine servicing and
installation planning. Its operational condition makes it suitable for
buyers seeking established bottling equipment for integration into an
existing carton-pack production line.Operational Performance &
VersatilityDesigned for cap application on Prisma SQ carton packs, the
machine supports accurate closure placement at production speeds up to
7,000 pph. Capping machinery of this type plays an important role in
maintaining pack usability and presentation by applying the selected
closure format consistently before packs proceed to downstream
packaging operations.The installed slim-cap configuration is
complemented by the possibility of conversion to HeliCap 27. Format
and cap-change work should be planned with appropriate compatible
components and line settings to maintain reliable pack
handling.Installation Requirements & Site PreparationInstallation
planning should allow for a machine footprint of 4250 x 2545 mm and a
height of 2660 mm, as well as safe access around the equipment for
operation, cleaning and maintenance. The machine weighs 1200 kg, so
the installation area should be prepared for appropriate load-bearing
and handling arrangements.The site requires a 400V, 50Hz electrical
supply and compressed air at 5.5 Bar, with consumption of 300 Nl/min.
Conveyor height, pack transfer interfaces and cap-feed arrangements
should be aligned with the upstream filler and downstream industrial
packaging machinery.Safety Standards & Compliance CertificationThe
machine carries CE marking. Safe commissioning should include
verification of guards, electrical connections, pneumatic connections,
emergency-stop functions and conveyor interfaces within the complete
production line. Routine inspection and maintenance of cap-application
components, pneumatic circuits and pack-transfer areas support
reliable operation in beverage production environments.
