CIME CAREDDU SILVER 8/1 CROWN

Used CIME CAREDDU Silver 8-1 crown filling monoblock 1500 BPHTechnical Specifications & Performance DataThe SILVER 8/1 CROWN is a filling monoblock designed for the filling and crown capping of still beer with bottle fermentation. Built in 2015 and subsequently overhauled/revised, this compact bottling unit combines an 8-valve light-vacuum filler with a single-head crown capper. It is configured for cylindrical 0.33L glass bottles and reaches a maximum output of 1,500 bottles per hour on this format.Model: SILVER 8/1 CROWNConstruction year: 2015Maximum speed: 1,500 bph for 0.33L bottlesFilling principle: Light vacuumFilling valves: 8Capper: Single-head crown cap turretStandard closure: Ø 26 mm crown capOptional closure: Ø 29 mm crown capContainer: Cylindrical glass bottlesRotation: Clockwise, left to rightMachine body height: Approximately 2,500 mmAdvanced Automation & Control SystemsThe monoblock is equipped with an electrical board and a three-phase electrical supply configuration with earth and neutral. The filler and capper heads use manual lifting adjustment, supporting practical setup for the installed bottle tooling. Eight pneumatic lifting cylinders incorporate air recovery and operate without mechanical springs.Power supply: 400 V, 50 Hz, three-phase + Earth + NeutralConveyor gearmotor: 0.75 kWFiller lifting: 8 pneumatic cylinders with air recoveryFiller head adjustment: Manual liftingCapper head adjustment: Manual liftingProduction Line Integration CapabilitiesThis used bottling line monoblock can be integrated with upstream bottle handling and downstream industrial packaging equipment through the supplied connecting conveyors. The conveyor arrangement includes a single-lane drive head, a two-lane side transfer section and a return/infeed head. Ø 800 mm accumulation and feeding turntables support bottle transfer and line buffering.The standard tooling is intended for cylindrical 0.33L glass bottles. An optional black plastic tooling set is available for a second cylindrical glass bottle format, applicable to both the filler and capper. This configuration supports beverage production where crown-capped glass packaging is required.Closed conveyor frame section: 100 × 100 mmStraight acetal-resin chain with 82.5 mm pitchDrive head with one lane and Ø 800 mm accumulation turntableTwo-lane side transfer sectionReturn/infeed head with Ø 800 mm feeding turntable and single-row alignment guidesProduct inlet connection: DN40 at 300 mm heightDrain connection: Ø 80 mmCompressed-air inlet at 200 mm heightMachine Condition & Maintenance HistoryConstructed in 2015, the filling monoblock has been overhauled/revised. Its filling tank is fully manufactured in mirror-polished AISI 304 stainless steel, providing a hygienic product-contact surface suitable for beer bottling operations. The machine is configured with dedicated standard tooling for the stated 0.33L cylindrical glass bottle format.Operational Performance & VersatilityThe SILVER 8/1 CROWN combines light-vacuum filling with crown capping for still beer with bottle fermentation. The 8-valve filling section is paired with a single-head crown turret for Ø 26 mm crown caps, while an optional accessory enables use of Ø 29 mm crown caps. Eight dummy bottles are included for sterilization procedures, and the unit is prepared for connection to a CIP washing system with the machine stopped.This second hand filling monoblock is suited to breweries and beverage production operations requiring a compact glass-bottle filling and capping solution. Its format tooling, crown-cap capability and integrated conveyor interfaces make it appropriate for integration into a glass bottling and industrial packaging line.Installation Requirements & Site PreparationInstallation requires a 400 V, 50 Hz three-phase power supply with earth and neutral, together with a compressed-air connection. Product supply is connected through a DN40 inlet positioned at 300 mm height, while drainage is provided through an Ø 80 mm outlet. The stated working height is 1,000 ± 50 mm, and the machine body height is approximately 2,500 mm.Site planning should allow for the supplied accumulation and infeed turntables, each with a diameter of Ø 800 mm, as well as the drive, side-transfer and return conveyor sections. The conveyor system uses acetal-resin chain and includes side guides and support bases for bottle handling.Safety Standards & Compliance CertificationThe machine is supplied with safety guards compliant with current regulations. A pair of photocells provides detection for overfill conditions and missing bottles, supporting controlled bottle transfer through the monoblock and connected conveyors. The stainless-steel product tank and provision for CIP washing support hygiene-focused operation in beer bottling applications.Safety guards compliant with current regulationsPhotocells for overfill detectionPhotocells for missing-bottle detectionMirror-polished AISI 304 stainless-steel product tankPrep