Sonstige Maschinen für Entsorgung und Recycling gebraucht kaufen (382)

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mech ...

GUILLOTINE REEL SLITTER 60 T, Arbeitsbreite 2.000 mm, Arbeitshöhe 1250 mm, Schnittkraft 2x30 Ton., Nr. 2 Pumpen 38+38 l/min, Volumen 26,4+26,4 ccm, Beschleunigen: 51 mm/s, Geschwindigkeit verringern : (80 Bar) 31-15 mm/sec, Öltank 255 l, 15 kW-Antrieb 400 V 50 Hz, Mit Messerschutz, hydraulisches Verriegelungssystem, Not-Aus-Seilzug, Schutzgitter, vollständig mit Bedienfeld, Top-Unterkunft, platzsparend für Hydraulikpaket, Benutzerhandbücher, Zeichnungen, CE-Konformität, 12-monatige eingeschränkte Garantie, Mögliche Ergänzung von, förderband, Gabelstapler-Schublade zum Handhaben des Wickels vor und nach dem Teilen, Ersatzmesser, Gewalt: 60 T, Arbeitsbreite: 2.000 mm. 78,74, Arbeits ...

SINGLE SHAFT SHREDDER 75 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1300x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 75 kw (100 HP) optional 90 kw (120 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1300 mm., 80 reversible tools, 4 usable tool sides, 5 upper fixed blades, 5 lower fixed blades, 73 average rotor revolutions/min., weight 6200 kg, production 2500-3500 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800  ...

SINGLE SHAFT SHREDDER 55 KW, sturdy structure in electro-welded steel, cutting chamber dimensions mm. 1100x1300, electro-welded sheet metal hopper for top loading, installed power on the rotor 55 kw (75 HP) optional 75 kw (100 HP), hydraulic unit power 5,5 kw (7,5 HP), transmission by belts, 1 rotor, rotor diameter 400 mm., rotor length 1100 mm., 66 reversible tools, 4 usable tool sides, 4 upper fixed blades, 4 lower fixed blades, 73 average rotor revolutions/min., weight 5500 kg, production 1200-2000 kg/h, emergency stop, drawer inversion system, supports for bearings with sealing system against dust and liquids, Adjustable steel counterblade, hydraulically operated pusher drawer with 800 m ...

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 1.250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 2.000 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

GUILLOTINE REEL SLITTER 60 T, Working width 3.500 mm, Working height 850 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 60 T, Working width 3.000 mm, Working height 1250 mm, Cutting force 2x30 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 60 T

GUILLOTINE REEL SLITTER 50 T, Working width 3000 mm, Working height 1500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 20-41 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T, installed power - used power in work: about 60-65% : 15

GUILLOTINE REEL SLITTER 50 T, constructed in sturdy painted steel,, Working width 3.000 mm, Working height 850 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 83 mm/sec, Speed down : (80 Bar) 41-20 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 50 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x25 Ton., No.2 pumps 38+38 lt/min, volume 26,4+26,4 ccm, Speed up: 51 mm/sec, Speed down : (80 Bar) 31-15 mm/sec, Oil tank 255 lt., 15 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 50 T

GUILLOTINE REEL SLITTER 35 T, Working width 2.500 mm, Working height 1.500 mm, Cutting force 2x17,5 Ton., No.2 pumps 30+30 lt/min, volume 21+21 ccm, Speed up: 84 mm/sec, Speed down : (80 Bar) 40-20 mm/sec, Oil tank 175 lt., 9 Kw drive 400V 50 Hz, With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydrauliC pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer.

An overbelt metal separator is used to remove ferrous contamination from chopped scraps, on the extraction belt from a shredder. We offer different solutions in size and power even for stainless steel., Just send us your requirements and we will send you a most cost-effective, targeted offer., An overbelt metal separator is the easiest way to remove ferrous contamination from scraps., This machine is a available in different sizes, with different magnetic forces, Constructed according to the Italian Top Quality Standards, This is an example :, OVERBELT MAGNETIC TAPE SEPARATOR TYPE R60-80E, - 800 mm wide at a distance of 200 mm from the belt, - Construction characteristics :, - permanent magn ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveyi ...

Hydraulic Gripper

Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/view?usp=d rive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed  ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water ...

Manufacturer LINDNER N O W A T R E D U C E D P R I C E Type Chain Extraction Belt 9.600 mm long With central chain transport and paddles Flat type on supports Constructed in sturdy steel 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width

Abfallkastenwagen Eichinger 2041.10; Volumen 750L; Tragkraft 300kg; kippbar; auf Rollen. Waste box wagon Eichinger 2041.10; capacity 750L; lifting capacity 300kg; tiltable; with rolls.

ID3574 Monsuna AKS A4 year/Baujahr 2014 Tire washing system for commercial vehicles, Monsuna type AKS A4 series, including tank, control system, signaling system, and contact loop for automatic operation. The washing zone is fully galvanized. The water supply is fully integrated into the module frame. Passage zone: 4000 mm long x 3100 mm wide (clear passage width: 2900 mm). Weight: approx. 5,000 kg (2 washing modules, each with a capacity of 2,500 kg). Tank: 7000 mm long x 3000 mm wide. Weight (unfilled) approx. 3,560 kg. Reifenwaschanlage für Nutzfahrzeuge Baureihe Monsuna Typ AKS A4 inkl. Tank, Steuerung,Signalanlage und Kontaktschleife für den Automatikbetrieb, die Waschzone ist kom ...

Baujahr 2006 Spänefoerderband fahrbarer Unterbau Liefertermin: sofort Ref: BU250081A Preis auf Anfrage. Wir liefern und installieren weltweit.

Vacumet Hightech Abfallentsorgungssystem Neuwertige Vorführmaschine Behältergröße: 142 Liter Volumenreduzierung: 50 - 70 % Korpusmaterial: Stahl Pulverbeschichtet Gewicht: 198 kg Schutzart: IP 54 Anschlusswerte: 230 V 50 Hz 1 kW Steuerung: SPS Geräuschentwicklung: 60 db Geprüft / Sicherheit: EN 60204 - VDE 0113 Abmessungen: B: 920 x T: 750 x H:780 mm kasu - vacumet ist eine moderne Maschine zum Desinfizieren der Abluft und Reduzieren von Müll . Durch Vakuum und das Eingeben von einem Geruchsblocker werden unangenehme Gerüche neutralisiert, Bakterien und Viren werden eingeschlossen und die bakterielle Verschleppung eingedämmt. Durch die anschließende Verschwei ...

Hersteller:Husmann Modell: HL II 1622 Baujahr: 2020 - Maximale Drehzahl: 20 – 40 - Betriebsspannung: 230V / 400V - Betriebsdruck: 400 bar - Leistung: 330 kW - Zulässiges Gesamtgewicht: 22.000 kg - CE-zertifiziert Mehr dazu finden Sie hier - / Kontaktieren Sie uns unter -

Wir bieten zum Verkauf einen kompletten Satz von Indutec Industrie-Aktenvernichtern Modell PM16/3 an, ausgestattet mit all seinen Originalkomponenten und Zubehör, ideal für den intensiven industriellen Einsatz in den Bereichen Recycling, Materialzerkleinerung oder industrielle Verarbeitung. ✅ Allgemeine Merkmale: Modell: Indutec PM16/3 Typ: Schwerer industrieller Aktenvernichter, hohe Leistung Zustand: Ausgezeichneter Zustand, komplett, mit Zubehör und Ersatzteilen Gesamtgewicht: ca. 47.500 kg aufgeteilt auf zwei Container + Boden Zusammensetzung des Sets (betriebsbereit): Erstes Gebinde – N 128790 – 13.000 kg Motor: WEG 315 S/M – 150 kW – Getriebe: FLENDER B3 SV 11 ...

Stoffschieber: - Hersteller: Watergates - Verschiedene Nennweiten verfügbar - Ausführungen: Pneumatisch / Mechanisch - Robust und langlebig für industrielle Anwendungen Zustand: Neuwertig Drehregler - Hersteller: Watergates / Orbinox - Verschiedene Nennweiten verfügbar - Ausführungen: Mechanisch - Präzise Regelung von Förderströmen Zustand: Neuwertig

MAGNETIC SEPARATORS, in form of overbelt plates,, grids, channels, stars, etc.

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control pane ...

Including: Injector Hopper Pipe connection Bends Clamps Cyclone Customized to your project

Zu verkaufen: Papierrecycling- und Sortiermaschine mit integriertem reversiblem Förderbandsystem 1) Papierverarbeitungsmaschine Hersteller: Hartner Baujahr: 2013 Betriebsstunden: 3500 2) Reversibles Förderband Hersteller: Hillebrand Modell: 4 GB 1400 Mehr dazu finden Sie hier - / Kontaktieren Sie uns unter -

1 Stück gebrauchtes Trenngerät Hersteller: TiTech Typ Titech AutoSort [NIR1-VIS] [S-2000] [X-H] einschließlich Beschleunigungsband Förderbreite ca. 2.000 mm AA ca. 5.000 mm